Sabiana IRC board-remote c Manual de usuario descargar pdf (Pagina 12)

Spigot

for air distribution

MAIN AIR INLET

AIR INTAKE

Two air outlets are provided

on the side of the unit for connection

to separate supply air outlets.

They can be used to supply air from

the fan coil unit to distant areas of a room

or even to a different room.

The total air flow does not change.

The air flow at high speed depending

on the air duct pressure drop is shown

in the tables below.

Note: all air ducts must be insulated

in order to avoid condensation.

Air distribution - Air distribution connection

The cassette is fitted

with inlets for fresh air to be mixed

with return air inside the unit (Fig. 3).

The fresh air flow is limited to 20%

of the total fan coil air flow at medium speed

and 100 m

/h for each treated air inlet.

The units feature fresh air inlets

on three corners (no inlets on the fourth corner

because of the condensate pump inside the unit).

The fresh air inlets are designed for the insertion of standard 110 x 55 mm rectangular ducts.

The air duct is connected quickly and easily. After removing the blank and the insulation inside the unit,

the mounting plate is rolled back and the air duct with its V-shaped section

must be pushed into the unit (see Figures below). The duct is then fixed to the mounting plate.

Note: the fresh air must be filtered.

Accessory “Fresh air connection” - Identification CAP - Code 6078005 (see page 14)

AIR DISTRIBUTION

AIR INTAKE

Fresh

air connection

MAIN

AIR INLET

AIR INTAKE

1 2 3 4

Fresh air supply - Fresh air connection

Model

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 42 43

Comentarios a estos manuales

Sin comentarios

Sabiana IRC board-remote c Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Sabiana IRC board-remote c