Sabiana IRC board-remote c Manual de usuario descargar pdf (Pagina 19)

CRC

CRR units with IRC electronic board

With infra-red remote control

With ETN

One control for each unit

Suitable for units with infra-red remote control only.

The NTC sensor, if connected to the T2 contact of the board, works like a change-over: fitted in contact to the supply

pipe it controls automatically the winter/summer switch in accordance to the water temperature.

identifiCation Code

T2 9079103

T2 Change-Over for infra-red remote control (accessory)

One control for more units

(20 units max.)

(maximum ToTaL LengTh of The connecTion cabLe = 800 m)

One control for each unit

(maximum LengTh of The connecTion cabLe = 20 m)

One control for more units

(20 units max.)

(maximum ToTaL LengTh of The connecTion cabLe = 800 m)

A group of Carisma units with IRC electronic board can be connected via a serial link and can consequently be

managed at the same time by just one infra-red remote control or IRC-ETN wall-mounted control. Using the special

jumper present on the board, one unit must be configured as the master, and all the others as slaves. It is clear that

the remote control must be pointed at the receiver on the master unit. To avoid problems, it is recommended to

install and connect the receiver only on the master unit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25

Sin comentarios

Sabiana IRC board-remote c Manual de usuario Pagina 19