Sabiana IRC board-remote c Manual de usuario descargar pdf (Pagina 3)

CRR version

Construction

Outer casing

Made from strong synthetic lateral corners and from galvanized and pre-painted frontal steel sheet.

The plastic top grid has fixed louvres and is reversible in order to distribute the air in two different directions.

Standard colours:

• Lateral corners and top grid: Pantone Cool Grey 1C (light grey)

• Frontal sheet: RAL 9003 (white)

• Other colours on request.

Inner casing

Made from galvanized steel with closed cell insulation.

Filter

Polypropylene cellular fabric regenerating filter.

The filter frame of galvanized steel is inserted into special plastic

sliding guides fastened to the internal structure for easy insertion

and removal of the filter.

Filter presence is highlighted by a plastic front cover featuring the

same colour as the top grid.

Fan assembly

The tangential fan assembly is composed of two fan shrouds: an external one in PVC and an internal one of holed,

shaped steel. The fan has an external diameter of 120mm and is the lenght of the coil. The fins are concave and are

positioned in a spiral shape along the whole lenght of the fan.

Electric motor

The motor is wired for single phase and has three speeds, with capacitor.

The motor is fitted on sealed for life bearings and is secured on anti-vibration and self-lubricating mountings.

Internal thermal protection with automatic reset, protection IP 20, class B.

Coil

It is manufactured from drawn copper tube and the aluminium fins are mechanically bonded onto the tube by an

expansion process. The coil has two 1/2inch BSP internal connections and 1/8 inch BSP air vent and drain.

The coil is not suitable for use in corrosive atmosphere or in environments where aluminium may be subject to

corrosion.

Flow and return pipe connections are situated at the same end on the left side looking at the unit. On request

we can deliver the unit with the connections on the right end side: this must be specified on the order as this

operation can not be carried out on site during installation.

Condensate collection tray

Made from plastic with an “L”-shape fitted on the inner casing.

The outside diameter of the condensate discharge pipe is 15mm.

Accessories and Controls

See pages 32 - 46.

1 2 3 4 5 6 7 8 ... 24 25

Sin comentarios

Sabiana IRC board-remote c Manual de usuario Pagina 3